Takagi tankless heaters have proven themselves to be extremely reliable through the years, requiring little upkeep or repair. Nevertheless, just a few minor service requirements needs to be performed at least annually to insure trouble-free performance. These are outlined in your Service and Set up Guide underneath Maintenance and Service.” Or name us at 1-888-882-5244.
Another drawback you might have is that the water is just not scorching enough and goes cold real fast. That is often because of a bad temperature control valve and/or thermostat. That is one other item you should purchase and change your self. If there is no such thing as a sizzling water in an electrical unit, this may be because of the higher thermostat failing or the breaker being tripped and a fuse possibly blown. In a fuel unit the pilot light might not be ignited, or what’s known as the thermocouple could also be dangerous and need to be changed.
I agree with the creator, the EdenPure infomercials are fairly deceptive. My uncle purchased 2 of them, a larger one and a smaller one. He died with both of them still within the cartons so I brought them to my house to make use of. Right here is the rub: Will they lower your expenses? No, turning off your fuel or oil heater is what saves cash, not operating this heater. Turn your fuel and oil off and don’t run this heater and you’ll get monetary savings too, duh… However look out if you get your next power bill!
Other Possibilities: If water is leaking from the threads of your T&P valve then remove the valve as per the instructions above. Check for any rust or corrosion on the tank. If there is any rust or corrosion your water heater will have to be changed. If the tank seems to be in good condition, wrap the threads of the valve in Teflon tape and screw it back on to the tank. Observe your water heater for a time period to see if this solves the issue.
Good day, I’ve a fema camper. The water labored great for a while. Then, at some point, out of the blue, went to shower, and no water. The water tank is filling up and getting sizzling like it’s speculated to. I can flip the valve and get the water to return on in the sink and switch the valve again to turn it off, however nothing within the shower. I’ve drained the water tank, and filled it up once more. It seems to be working fantastic. I’m at a lose. Any ideas could be appreciated.